Ethernet Adapters

LAN Tornado agent is the very useful, easy-to-use and low cost network testing software. LAN Tornado is a tool for measure Ethernet based networks metrics. LAN Tornado agent is very applicable software for testing switches, routers, servers and other network devices. LAN Tornado Agent receive...

PPPOEd is PPP-over-Ethernet implementation. To install follow these commands run ./Install_pppoe Follow the prompts For more details on the prompts etc, look at the file QUICK-INSTALL-example The man pages on pppoed are also helpful for documentation: man pppoed Whats New in This...

VLAN is an implementation of the 802.1Q VLAN protocol for Linux. VLAN allows one to have Virtual LANs on a single ethernet cable, giving you the ability to segregate LANs efficiently. VLAN should support up to 4094 vlan interfaces per ethernet device..


Platforms: *nix

dslKonnector is a Kommander script to start, stop, restart DSL connection (ppp over ethernet), using tools "pon dsl-provider" and “poff dsl-provider". To use it you will need to have superuser privileges. dslKonnector does not configure dsl connection, so you will have to setup it using tool...


Platforms: *nix

Fli4l is a single floppy distribution, Linux-based ISDN, DSL and Ethernet-Router. You can build it from an old 486 based pc with 16 megabyte memory, which is more than adequate for this purpose. The necessary boot-disk can be built under Unix, Linux or Windows. You dont need any specific...


Platforms: *nix

Laptops which use dynamic IP address assignment via DHCP have the problem that the boot process is much longer when no wire is connected to the Ethernet card. This is because the startup scripts have to wait for the DHCP request to time out. ethwireck can detect if the physical layer of the...


Platforms: *nix

EtherApe is a graphical network monitor for Unix modeled after etherman. Featuring link layer, IP and TCP modes, it displays network activity graphically. Hosts and links change in size with traffic. Color coded protocols display. It supports Ethernet, FDDI, Token Ring, ISDN, PPP, SLIP and WLAN...


Platforms: Mac

FREESCO (stands for FREE ciSCO) is a free replacement for commercial routers supporting up to 10 ethernet/arcnet/token_ring/arlan network cards and up to 10 modems..


Platforms: *nix

netEasy project allows easy and fast configuration of ethernet interfaces in Linux. With netEasy, its possible to change network parameters such as IP address, netmask, and gateway in an easy, fast, and interactive way. The use of a DHCP server is also possible. The settings may also be saved...


Platforms: *nix

WANPIPE S-series is a family of intelligent multi-protocol WAN and ADSL adapters that support data transfer rates up to 8Mbps. All WAN protocols supported by WANPIPE are implemented in firmware and run on the card. An advantage of an intelligent adapter is that it offloads the system CPU and...


Platforms: *nix

SIB (Simple IPX Bridge) is able to tunnel IPX and IP frames received by your Ethernet device via UDP over the Internet. It is able to put the interface it listens on to promiscous mode, so all frames (not only broadcasts, and frames for the tunneling server) can be received. Actually every...


Platforms: *nix

iTattle is a network administration tool that can get information on your wireless AirPort Extreme, built-in Ethernet and System.


Platforms: Mac

The program receives magic packets and can be used as a Wake-On-LAN configuration troubleshooting tool. It allows to select local network adapters and create Windows Firewall exceptions. Requires administrator rights.


Platforms: Windows, Windows 7, Windows Server

Sheet Lightning is a specialised engineering 2D/3D CAD System for creating and unfolding sheet metal designs for fabrication or manufacture. It handles everything from simple cylinders, cones, rectangular ducts and ovals, to adapters, adapting any of these section types, interections between any...


Platforms: Windows, Windows 8, Windows 7, Windows Server

Control engineers and instrumentation technicians require software tools to test communications both to and from Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), and other logic solving devices. ModBusProbe supports MODBUS communications to industrial logic solving devices...


Platforms: Mac

The Managed Switch Port Mapping tool communicates with a managed ethernet switch using SNMPv1/v2c and maps the physical port connections to MAC and IP addresses of the attached devices. Capable of mapping many different brands and models of managed switches. Saves technicians time mapping out...


Platforms: Windows

IENetP or Industrial Ethernet Network Performance for long, is a handy test tool specially designed to help you test your network. Basically this test tool determines the network performance of industrial devices using standardized metrics and tests. for WindowsNT, 2K, XP, 2003, Vista, 7


Platforms: Windows, 2K, XP, 2003, Windows Vista, 7

Designed for small-medium business and enterprise environments, AirStop® Multiport ensures that: * Only a single communication adapter can be used during a given computing session. This setup protects the corporate network from "Wireless Bridging" attacks. * Simultaneous connection between...


Platforms: Windows

Universal Network Boot Disk is a TCP/IP Network Boot Disk with built-in support for most popular PCI and CARDBUS adapters. A menu driven (no editing necessary for most users!) choice of DHCP/Static, domain name, computer name. The application has support for user-supplied network drivers, as well...


Platforms: Windows

AMP NetMonitor is a handy utility designed to monitor the network activity of all the network adapters in the computer. It shows for each network adapter the current, average and total transfer values, along with an history graph. It can show also the recent activity in the taskbar icon.


Platforms: Windows