Electronic Boost Controller

The files cover areas like detailed circuits, harmonics study, data sheets for various electronic devices used in the project and a SIMULINK model of the proposed regulator model. Requirements: - MATLAB 7.2 or higher - MATLAB's Simulink - MATLAB's SimPowerSystems

Ciiva is an electronic component management tool which has been designed to revolutionize the way components are managed throughout the Product Lifecycle Management (PLM) process. It brings together information sources which are normally fragmented or until now were simply not available and...

Most of the time we use Simulink to simulate a PID controller. But this files run it as a Matlab code.Extract the files to the working directory and just run the file PID_ctrl_call.m.You can vary the PID tuning parameters in the file pid_ctrl.m and see what will happen.


Platforms: Matlab

This package includes a configurable Simulink model for three different types of DC-DC converters (Buck, Boost and Buck-Boost converters) with a PWM PI controller. The example provided shows a case to boost voltage from 5 volts to 25 volts. It can be used to learn DC-DC converters and their...


Platforms: Matlab

The model simulates two open loop boost converter. One converts 24V to 48V with 240W rating while the other converts 5V to 12V with low watt rating.


Platforms: Matlab

This is the demo file for video demo:http://www.mathworks.com/products/demos/sl...tor-video-demo/and "Seth on Simulink" blog post "PID Control Made Easy":http://blogs.mathworks.com/seth/The demo shows the new PID Controller block in Simulink and new PID Tuner in Simulink Control...


Platforms: Matlab

The model simulates two boost converters in close loop.


Platforms: Matlab

It's a servo controller for six servo motors. It can be used to control a antropomorphic arm with six motors. For a correct execution, it must select the motors following this table: #servo - char to use for the motor selection 1 a 2 b 3 c 4 d 5 e 6 fThe microcontroller must use the same char. It...


Platforms: Matlab

This technique is used in many control application and here i used it to tune the PID controller


Platforms: Matlab

This simulation illustrates the effects of the fixed-pointcomputations on the closed-loop precision for a 16-bits PID controller.The rounding mode, the point where the truncations take place and theformat width for the internal variable have a significant action on theclosed-loop permanent...


Platforms: Matlab

This file illustrates the effect of a properly designed proportional integral controller on the performance of Electrohydraulic servoactuators. The description of construction, operation and mathematical modeling of the Electrohydraulic servoactuator and steps of design of the PI controller are...


Platforms: Matlab

1) Std 2 in 1 out Fuzzy Controller ,2)semi-active suspension


Platforms: Matlab

Designing a Controller and obtaining the Controller Function by rootlocuse method


Platforms: Matlab

This script can be used to control motors connected to Roboteq motor controller. Right now the code is for controllers which are accessed over a local tcp/ip network. Replace the ip address with yours. That should be enough to run the motors.


Platforms: Matlab

this simulation simulates a basic boost converter.run the boost.m file and specify the parameters then run the model file.


Platforms: Matlab

This is a general purpose controller that I have built using the Fuzzy Logic Rules. You don't need to have any mathematical background in fuzzy logic to run this model.You don't need to have fuzzy logic toolbox to run it aswell.It contains both linear and a nonlinear examples. It also has a read...


Platforms: Matlab

Digital version of Fractional-Order PID Controller (DFOC) of the form:C(s) = K + Ti/s^m + Td*s^d for given sampling period Ts [sec].For more details and help write:>> help DFOC


Platforms: Matlab

This code uses gui to demonstrate the step response for DC Motor Position system with PID controller which can be edited by three sliders. The edit texts can be edited by user, after editing press plot pushbutton to plot the response of new current system. Pushbutton (Reset) returns to the...


Platforms: Matlab

The files cover areas like detailed circuits, harmonics study, data sheets for various electronic devices used in the project and a SIMULINK model of the proposed regulator model.


Platforms: Matlab

PHPOpenMvc is web development framework PMVC (PHP Model View Controller).


Platforms: PHP