Cpu Overclock Temperature

CPU-Z is a freeware detection program, based on the Panopsys hardware detection engine, that allows you to get some info on your computer. CPU-Z also provides several tools for a complete report, that includes CPUID, MSR, PCI device list, SPD, DMI. Also a cache latency calculation tool. CPU-Z...

HDD Temperature is a program that monitors the temperature of your hard drive, which is very important to avoid possible system crashes. It can adjust the temperature to what you tell it, thus you can forget about it while it works.

OCCT is a utility that works to check the stability and sound working of the CPU and RAM memory. OCCT means OverClock Checking Tool, and here are its principle characteristics:* Support for up to 16 cores.* Completely personalizable tests for duration, priority, CPU or RAM memory, etc.* Automatic...


Platforms: Windows

If you have Windows 95 or Windows 98 installed in your PC, and you want to know at all times the CPU use, download CPU Monitor for free.This application adds a small icon in the Windows taskbar next to the clock, so that at any time you can see the CPU use. Thus you can see what slows down your...


Platforms: Windows

HDD Temperature Enterprise is hard-drive temperature monitoring software for corporate networks and small businesses. This rather straightforward program is a must have utility for any company that is determined to have a ZERO risk of losing their data because of hard-drive overheating. There are...


Platforms: Windows

aiSystemWidget is system monitor utility that provides newest, innovative way of monitoring your Android based mobile device system resources, like Memory, CPU, Network traffic, Battery usage and etc. Full name of Application is "System Monitor Widget for Android". It is an advanced system...


Platforms: Android,Handheld/Mobile Other

WMsensors.pl is a small perl-program which monitors the temperature and voltages of CPU and motherboard and also shows the Fan-speed. Runs as a dock app for Window Maker. Needs no config-file, but a proper configured installation of lm_sensors and uses the Wharf::JDockApp modul from the CPAN..


Platforms: *nix

If you use Linux with WindowMaker and have a Dell 8XXX Laptop, installed the i8kutils and like some nice DockApps then try this one. wmi8k monitores the CPU temperature and the fan speed. Whats New in This Release: - By clicking on F R and F L you can now control the fans! (Switch fom off...


Platforms: *nix

GtkSysinfo project is a perl-Gtk2 software for Linux which makes it possible to obtain a maximum of information about the system such as temperature(with lm_sensors) , CPU frequency, hardware(with PciUtils) , network , ACPI ....


Platforms: *nix

Wmsensormon is a doc app for WindowMaker that utilizes lm_sensors to monitor CPU temp, sys temp, fan speeds, and CPU voltage. It offers configurable warnings for overheating, and the sensors displayed are adjustable by the user with command line parameters. Installation: make make install...


Platforms: *nix

Temperature Monitor is an application to read out all available temperature sensors in Macintosh computers. The program can display and visualize measured values in a large variety of fashions. The application supports the following operations on the measured readings: display in a default window...


Platforms: Mac

CPU Director allows you to view and configure the cache and processor clock speed settings on your PowerLogix upgrade card. The included utilities allow you to enable or disable the cache "on the fly", change the speed at which your backside cache operates and automatically enable the cache at...


Platforms: Mac

CoolBook lets you monitor CPU frequency, voltage, and temperature.Registered users may set voltage and frequency manually. This can dramatically reduce heat dissipation and fan noise.Use your MacBook with full performance without a battery installed.Storing your battery properly when not used...


Platforms: Mac

miniStat2 is a most powerful system monitoring widget, that allows you to measure almost everything in hardware of your Mac. The widget has one main view that shows summary info about your computer, and 6 dedicated panels with more detailed stats. The miniStat2 is not just a simple widget, it's...


Platforms: Mac

Temperature Monitor Widget is the Dashboard version of its "bigger brother" Temperature Monitor. It is recommended that you use Temperature Monitor first before using the widget edition to learn more about the sensor equipment of your computer. The applications are designed to give you access to...


Platforms: Mac

Turn a bunch of average photos into stunning images with various actions and effects in a few clicks! Make color corrections to photos by adjust brightness, contrast, saturation, temperature, and tint. Improve visual quality of images through sharpening, noise reduction, and auto-white-balance...


Platforms: Windows

Features: 1.Reset TSC The reported TSC in case of AMD Phenoms is always the Performance state 0 detected at boot time. This can be a potential problem for old programs(eg. NFS 2000) and performance testing tools (eg. latency.exe), since modifying the core clock to lower (or higher)...


Platforms: Windows

Mr.H CPU-Mark is a very lightweight application that was designed in order to provide you with a simple means of assessing your processor performance. The utility can perform the whole set of tests, but you can simply choose them one by one in case you don't need all of them.


Platforms: Windows, Windows Vista, XPX64, 7, 7x64

iFanAutoControl is an application to automatic control the fans of the computer and regulate the temperature of MacBook and MacBookPro Apple Computers based on Intel processors and Windows OS.


Platforms: Windows

Core Temp is a compact, no fuss, small footprint, yet powerful program to monitor processor temperature and other vital information. What makes Core Temp unique is the way it works. It is capable of displaying a temperature of each individual core of every processor in your system! You can...


Platforms: Windows