Amd Cpu Identification Dos

Features: 1.Reset TSC The reported TSC in case of AMD Phenoms is always the Performance state 0 detected at boot time. This can be a potential problem for old programs(eg. NFS 2000) and performance testing tools (eg. latency.exe), since modifying the core clock to lower (or higher)... Platforms: Windows

Pentium works on Intel Pentium class and AMD CPUs to determine the CPUID information such as the vendor, brand/model, step, model, instruction set family, cpu serial number, and the RDTSC Time stamp register for high resolution timing measured in CPU cycles since the last boot. It is designed... Platforms: Windows, XP, Windows Vista

Same as MemSet but for CPU with Integrated Memory Controller only, CPU-Tweaker allow to change memory timings under Windows. You can read principal and secondary timings, and eventually change these timings values. The program will work only for Processors with Integrated Memory Controller: -AMD... Platforms: Windows

If your DOS programme can print to a file, DOS PRINTER allows you to print to any WINDOWS printer. You can print to network printers, USB printers, and even all the latest printers that have "Windows Only" written all over them! If it can't print to a file there are instructions for how to... Platforms: Windows

This program provides an accurate snapshot of the percentage utilization of the CPU, the technique illustrated works on Windows 95/98/nt/2000/xp/2003. Free, no-nags. Platforms: Windows

CPU Multi-Gauge for Cisco is an important tool when monitoring the health of your network. A high router cpu load may indicate anything from excessive traffic to unstable routing protocols. Use the Router CPU Load when documenting your network to help create a baseline and identify high load... Platforms: Windows

Necromancers Dos Navigator is a "Norton Commander" clone. Necromancers Dos Navigator uses a well known text-mode interface, is highly customizable, and has a lot of features.. Platforms: *nix

Clean Karamba CPU is a clean and simple, font is included. Monitors: - Cpu type - Speed - Cache - Temp - Load If there are problems please post them, so i can make a better version.. Download KDE-Look.org Community Portal for KDE Themes Wallpapers Icons Sounds Screenshots Schemes Skins... Platforms: *nix

Linux ATI CPU HDD Control Daemon is able to reduce power consumption in a laptop by scaling back CPU, GPU (Radeon only), and HDD. It uses CPUFreq, ACPI, HDDTemp, and internal functions. It also checks for thermal overheating for the sake of laptop health. Now implementing an app scheduling... Platforms: *nix

This is a project to create 64-bit virtual CPU, create a 64 bit assembler for the CPU and then port C to it, and then create scripts to port GNU/Linux to it. The aim is to run 64-bit Linux on common 8/16/32 bit CPUs in applications where speed is not an issue. Whats New in This Release: -... Platforms: *nix

Aero AIO: cpu/mem plugin mod is a mod of the cpu/memory plugin for aero aio. The hardware information is gathered via backends. You can easily write a python backend for your hardware. Look at the files cpumemv2_backend.py, cpumemv2_default.py and cpumemv2_i8k.py to learn how to write... Platforms: *nix

Sys::CPU is a Perl extension for getting CPU information. Currently only number of CPUs supported. SYNOPSIS use Sys::CPU; $number_of_cpus = Sys::CPU::cpu_count(); printf("I have %d CPUsn",$number_of_cpus); print " Speed : ",Sys::CPU::cpu_clock(),"n"; print " Type :... Platforms: *nix

The Linux Duracell CPU load monitor is a program that drives a Duracell or Energizer on-battery tester to display the CPU load of a system. It can be easily adapted to display other things that can use a slow bar graph kind of display that varies between 0% and 100%. Instructions to hack a... Platforms: *nix

The benchmark program takes less than 10 minutes to run (on most machines) and compares the system it is run on to two benchmark systems (a Dell Pentium 90 with 256 KB cache running MSDOS and an AMD K6/233 with 512 KB cache running Linux). The archive contains the complete source,... Platforms: *nix

Active@ Disk Image is a free DOS-based solution designed for complete backup and restoration of the whole HDD as well as the particular FAT / NTFS partitions and logical drives. You can create compressed and non-compressed raw images (containing all drive's data - a mirror of drive's surface... Platforms: MS-DOS

The program is ideal for measuring the cpu usage for specific programs, to find out the total average cpu usage of a program for its entire uptime or to start measuring at a point in time you are interested in. The latter is for example useful to find out how much cpu a program uses when idle.... Platforms: Windows

NTFS Reader DOS Boot Disk provides read access to NTFS drives from the MS DOS environment. It supports long filenames as well as compressed and fragmented files. NTFS Reader for DOS allows you to preview the files on NTFS and copy them from NTFS to FAT volumes or network drives. In order to use... Platforms: All

Bleeding CPU was specially designed as an accessible, simple and very easy-to-use piece of software that allows you to view the details of your CPU. Now you can make use of this Open Source application to see what you're CPU is actually capable of. Platforms: Windows

Mz CPU Accelerator is an application that automatically changes the priority of the foreground window, by allocating more CPU power to the currently active application (program-game). It automatically de-allocates CPU priority when a new active application is used. All this procedure, can lead to... Platforms: Windows

This module add 2 fields to Customers page:- VAT Number- Tax Identification Number Platforms: Windows, *nix, PHP, BSD