Download Shareware and Freeware Software for Windows, Linux, Macintosh, PDA

line Home  |  About Us  |  Link To Us  |  FAQ  |  Contact

Serving Software Downloads in 976 Categories, Downloaded 29.544.749 Times

Download - OWHTTPD 2.4p1
 

OWHTTPD 2.4p1

OWHTTPD
OWHTTPD project is the same code as OWFS, modified to run as a simple web server. FUSE is not required, portablilty should be even better, and all the same capabilities should be supported. See the download section to get owhttpd. The server can be bound to any port, and is secure (only shows 1-wire bus, no local files). Whats New in This Release: - Added Willy Robisons alternative USB timing for the DS2490. - Use --altUSB on the...

Download OWHTTPD From
Download Link #1



POPULAR DOWLOADS
Automation Tools  -  ipcam 0.4.3
ipcam is a motion detection and recording program for IP cameras. ipcam software reads the JPEG stream from a ip camera and tries to detect motion by comparing the images to each other and calculating differences in brightness and color. Once...
8.19 KB  
Automation Tools  -  ExpenseTracker 0.1.0
ExpenseTracker is a tag based personal expense tracking software. It is developed to run on Windows and Linux flavors. The project uses sqlite3 for storing user preferences and expense details.. Get ExpenseTracker at SourceForge.net. Fast,...
31.74 KB  
Automation Tools  -  MatPLC coruscant
MatPLC project is a software-based PLC for industrial automation. MatPLC is a software-based PLC (Programmable Logic Controller) for industrial automation. Ultimately, it should be possible to run a factory using this software. Currently, one...
2.3 MB  
Automation Tools  -  K8055 0.1
K8055 project is a sample program to use the Velleman K8055 interface Board on Linux. k8055 is a sample program to use the Velleman K8055 interface board on Linux. The USB K8055 interface board has 5 digital input channels, 8 digital output...
450.56 KB  
Automation Tools  -  OpenSCADA Project 0.8.0(Atlantis)
The OpenSCADA project aims to create a full-featured and state-of-the-art SCADA (Supervisory Control and Data Acquisition) system to be used in industrial and civil engineering applications to control distributed systems from a master location....
 
Automation Tools  -  Parallel port powerSwitch 0.1.1
Parallel port powerSwitch project is a TCP/IP server to control a parallel port power switch. pp_powerSwitch is a TCP/IP based server, which controls a power switching device through the parallel port. Besides Java, I used a bit C to handle the...
9.22 KB  
Automation Tools  -  Linux X10 universal device driver 2.1.4
Linux X10 universal device driver (also known as Project WiSH) provides a /dev interface to an X10 network through a combination of Linux kernel modules and daemons. It is intended to provide a standard interface and syntax to shell script...
102.4 KB  
Automation Tools  -  Thinux 1.0.1
Thinux is a thin client system that resides on a Red Hat Linux server. When a thin client requests to boot on LAN, the server will upload the thin client linux system to the thin client. Ideal for lightweight devices such as Point-of-Sales...
36.6 MB  
Automation Tools  -  Servo Actuation Manipulator 0.6.1
SAM (Servo Actuation Manipulator) is a GTK+ based X11 application for controlling anywhere from 1 to 254 (so far) servo motors via a serial port connection. Specifically, this program was made for the Scott Edwards Electronics Mini SSC II....
225.28 KB  
Automation Tools  -  trux_motion 1.0
trux_motion project is a program for detecting motion between two JPEG images. trux_motion is a simple program for detecting motion between a pair of JPEG images. It uses the GD library to load the JPEGs. It uses a simple, fairly fast...
9.22 KB