WOSH (Wide Open Smart Home) is an open source, multi-platform framework (message oriented middleware) written in ANSI C++, designed to enable (smart) home automation. WOSH is a Service Oriented Framework (SOA) providing a (Network) OS independent infrastructure for developing component based...

ipcam is a motion detection and recording program for IP cameras. ipcam software reads the JPEG stream from a ip camera and tries to detect motion by comparing the images to each other and calculating differences in brightness and color. Once motion is detected, ipcam switches to recoding mode...

Thinux is a thin client system that resides on a Red Hat Linux server. When a thin client requests to boot on LAN, the server will upload the thin client linux system to the thin client. Ideal for lightweight devices such as Point-of-Sales terminals, embedded devices, etc..


Platforms: Linux

Keyword: Automation, Cd, Client, Live Cd, Miscellaneous, Server, Thin, Thin Client, Thinux

The OpenSCADA project aims to create a full-featured and state-of-the-art SCADA (Supervisory Control and Data Acquisition) system to be used in industrial and civil engineering applications to control distributed systems from a master location. The OpenSCADA project was started in order to...


Platforms: Linux

Keyword: Aims, Atlantis, Automation, Create, Create A, Miscellaneous, Openscada, Project, State-of-the-art, To Create

LOSSA project is a home automation system. LOSSA is a home automation system that aims at distributed network of devices with simple interconnect system, personal computer intercommunication, simple wiring, and very low cost. The project is still in architectural development state and the...


Platforms: Linux

Keyword: Automation, Home, Home Automation, Lossa, Miscellaneous

jHomenet is a home automation application. jHomenet uses both X-10 and Dallas Semiconductor 1-Wire network sensors and devices to collect sensor data and control devices. jHomenet project can be programmed to respond to events, including particular sensor data values or time-of-day events....


Platforms: Linux

Keyword: Automation, Home, Home Automation, Jhomenet, Miscellaneous

Javacelot project is a Java-based home automation utility for the Adicon Ocelot. Javacelot is a Java utility for communicating with an Adicon Ocelot over the serial port. It uses Keane Jarvis RXTX utility for raw serial port I/O, Jakartas Log4J for logging, and Ant for building. Javacelot...


Platforms: Linux

Keyword: Adicon Ocelot, Automation, Automation Utility, Home, Home Automation, Housemonkey, Java-based, Miscellaneous, Ocelot, Rxtx, Utility

Quick and Dirty Sync tries to make two directories the same by comparing files sizes and copying new or changed files across in both directions, meaning you dont need to supply a "from" and "to" directory. Quick and Dirty Sync project works for local and (some) FTP directories. Your mileage may...


Platforms: Linux

Keyword: Automation, Changed Files, Directories, Dirty, Dirty Sync, Files, Miscellaneous, Quick, Quick And Dirty, Sizes, Sync, To Make, Tries To

Grifcat is a simple utility which monitors a Griffin Powermate and sends state change information to the calling script. It tracks the button and wheel motion, reporting each move as it occurs and accumulating net changes in both directions. It is convenient for script writers and those looking...


Platforms: Linux

Keyword: Automation, Change Information, Grifcat, Griffin Powermate, Miscellaneous, Monitors, Powermate, Sends, Simple, State, State Change, Utility

LIRC Client Daemon project is an attempt to solve certain problems in LIRC. The LIRC Client Daemon is a per-user daemon that sits between the LIRC daemon (from the Linux InfraRed Control project) and any other programs that use LIRC. It ships with a replacement library for LIRCs...


Platforms: Linux

Keyword: Attempt, Automation, Client, Client Daemon, Daemon, Lirc, Miscellaneous, Problems, Project, Solve

XScanMaster is a program to control intelligent lights using DMX512, based on the fixture library from GrandMA-firmware. The DMX512 output is done using DMX4Linux, which offers support for most common interfaces and many DMX512 lines. Also included are functions to control fixtures movements in...


Platforms: Linux

Keyword: Automation, Control, Fixture, Lights, Miscellaneous, Program, Using, Xscanmaster

OWFS is a method under linux to allow 1-wire devices to appear like files in a directory. You can then enter a command like "cat */temperature" to have all the temperatures sensors measure and print their data. For instance, the collection of temperature sensors above are all on one bus,...


Platforms: Linux

Keyword: Allow, Automation, Devices, Files, Linux, Method, Miscellaneous, Owfs

PPort is a simple yet handy automation program and its documented counterpart for interfacing a PC with external devices. With this bundle, one can control any household appliance or electronic device with minimal hassle and practically no changes. Get alph at SourceForge.net. Fast, secure and...


Platforms: Linux

Keyword: Automation, Miscellaneous, Pport

fs10 is a control program for the interface FS10PC from the German catalog company ELV. You can read the built-in atomic clock receiver and set the system clock of your Linux box. You can also send commands (on/off) to the switchable, radio-controlled socket outlets. Installation: 1. Edit...


Platforms: Linux

Keyword: Automation, Catalog, Catalog Company, Control, Control Program, Elv, German, Interface, Miscellaneous, Program

X10dev GUI project is a GUI providing remote access to a Linux box with X10dev drivers installed. This Java Client demonstrates the simplicity of creating a remote control Web-based client/server for home automation control with the WiSH x10dev drivers. The package includes a socket server...


Platforms: Linux

Keyword: Access, Automation, Box, Drivers, Gui, Linux, Linux Box, Miscellaneous, Providing, Remote, Remote Access

jukebox-control project is a complete automation for Sony A/V components featuring S-Link (CD, DVD, MD, etc). jukebox-control includes a Linux driver module for an easy/dirty cheap to build DIY parallel to the Sony S-Link interface, plus Perl modules with both control-A1 (II) and control-S...


Platforms: Linux

Keyword: Automation, Cd, Components, Dvd, Etc, Featuring, Jukeboxcontrol, Md, Miscellaneous, S-link, Sony, Sony A

domus.Link project is a web-based frontend for Heyu. Design focuses on separating configuration from actual controls thus giving the user a simple and user friendly GUI. The primary concern being that anyone with little or no knowledge of home automation systems can easily manage/administer the...


Platforms: Linux

Keyword: Automation, Domus Link, Frontend, Miscellaneous, Project, Web-based

BlueLava project is a Web/WAP CGI-based x10 interface for home automation. BlueLava is a Web and WAP (CGI-based) x10 interface. Using commandline-based x10 tools as its backend, it allows you to control x10-compliant electronics and x10 modules from within a Web browser or a WAP/WML-enabled...


Platforms: Linux

Keyword: Automation, Bluelava, Cgi, Home, Interface, Miscellaneous, Project, Wap, Wap Cgi

PLaTos project is a framework for easy and comfortable building of various LaTeX documents. PLaTos is Platon LaTeX Office Suite. It is a framework for easy and comfortable building of various LaTeX documents with several advanced features.. Platon Group is Slovak open source software...


Platforms: Linux

Keyword: Automation, Building, Comfortable, Easy, Framework, Latex, Miscellaneous, Platos

MatPLC project is a software-based PLC for industrial automation. MatPLC is a software-based PLC (Programmable Logic Controller) for industrial automation. Ultimately, it should be possible to run a factory using this software. Currently, one should keep in mind that it is still at the...


Platforms: Linux

Keyword: Automation, Coruscant, Industrial, Matplc, Matplc Coruscant, Miscellaneous, Module, Modules, Plc